Cone crusher is a kind of crushing machinery and equipment commonly used in mine crushing and stone crushing. The correct feeding method determines that the equipment will not be blocked during operation, so how should we go when the cone crusher is partially blocked in the feeding How about processing?

Due to the uneven feed size, the transition between the feed hopper and the feed opening forms a right angle, especially when the degree of dryness and wetness of the ore changes, it will cause blockage. The correct feeding method and the distribution of the cone crusher Combination of tallow and the feed box will help ensure that the fully mixed materials are evenly distributed along the entire crushing cavity. The segregation of fine and coarse materials should be kept as small as possible to minimize liner wear. Regardless of the cone crusher model, if the material condition is not ideal, it is recommended to screen before crushing.

In addition to screening treatment before crushing, iron removal equipment is installed near the equipment to prevent blockage caused by falling metal. And pay attention to controlling the speed of the material during the feeding process. It is recommended to add an inclined arc liner to the front face of the mine hopper to make the material shake off to the arc liner and slide into the material opening along the liner freely. The discharge chamber of the cone crusher should have inspection holes for cleaning and inspection inside. A partition is arranged in the discharge chamber to withstand the impact of falling ore. The partition absorbs most of the impact force of the material falling on the transportation equipment, thereby increasing the service life of the equipment.