The output of the heavy hammer crusher is relatively large, and the production time must be fixed and firm. As we all know, a solid foundation directly affects the stability of the machine, laying a good foundation for the construction of the house, and ensuring that the house will not easily collapse in the future. The same is true for heavy hammer crushers. If the foundation is not firm or loose during long-term use, or even obvious cracks appear, the crusher will receive the most direct impact. The output of the heavy hammer crusher is relatively large, and the production time must be fixed and firm. As we all know, a solid foundation directly affects the stability of the machine, laying a good foundation for the construction of the house, and ensuring that the house will not easily collapse in the future. The same is true for heavy hammer crushers.

If the foundation is not firm or loose during long-term use, or even obvious cracks appear, the crusher will receive the most direct impact. In mine production, due to its special environmental factors, the heavy hammer crusher will vibrate violently for a period of time, causing users to stop working and find reasons to stop shaking. Huaye Company reminds you that you should pay more attention to some details in daily work and reduce the shaking of the crusher, which is a very effective measure to reduce downtime. The heavy hammer crusher can be fixed on the ground by these screws. If the screws are loose or broken, so this side of the machine will shake slightly. If the staff does not pay attention, the shaking will be aggravated, and the screws will be broken after a long time. , Causing the entire machine to shake violently. Finally, when the heavy hammer crusher works for a long time, due to the small initial installation error, the inner groove wheel will deviate from the original position, the center of the machine is unbalanced, and it will also cause severe vibration. Therefore, before installing the equipment, it is necessary to ensure the stability of the equipment, reduce unnecessary losses, and improve production efficiency.