The electric control cabinet of the vertical shaft crusher is connected with the main motor, conveyor, magnetic separator, sorting machine, etc., and in the vertical shaft crusher and the electric control cabinet, in addition to the one-key start and one-key stop of the main motor, It is also necessary to set the reverse function, and the reverse also needs to be adjusted to manual and automatic modes. In fact, the main reason for this design is the load of the crushing rotor of the vertical shaft crusher when the scrap metal is crushed by these neutral shaft crushers. The amount will increase, and if there are different types or too much feeding during the blanking process, the machine itself will be stuck due to the overload, and even cause equipment damage. Add an automatic reaction to the electric control cabinet. After the function is changed, this problem is solved.

Because the load is set in the electric control cabinet, when the load of the vertical shaft crusher in the crushing process reaches or exceeds the set load, the vertical shaft crusher will automatically start the reverse function to remove the material. Exiting the crushing rotor, the compliance amount is instantly reduced. When the load is reduced, the normal crushing operation mode is restored and the work continues. Then, with the automatic reverse function, why do you need to reverse manually? The manual reversal function is mainly set for the convenience of daily equipment maintenance and replacement of wearing parts. This setting avoids the cumbersome disassembly, maintenance and repair.

The vertical shaft crusher is a one-piece combined equipment without disassembly and installation. For the two-axis vertical shaft crusher, in addition to its own unique design and crushing form, it is crushed: engine, bumper, metal briquette, motorcycle In the case of medium and large metal scraps such as automobiles, the electric control of the medium and large vertical shaft crusher also needs to be fully considered.

The impact crusher determines the feeding speed according to its own ability, and the feeding speed is too fast: the impact crusher needs to determine the feeding speed according to its own ability, if the feeding is too fast, the impact crusher will not be able to complete the crushing of the material Cause the material blocking of the impact crusher. Feeding is too large: If the material is not crushed directly into the impact crusher, some larger materials cannot be crushed, resulting in material jams and blockage of the impact crusher.

Internal damage: If there is damage inside the impact crusher, it may also cause material blocking, such as structural damage, component falling off, etc. Motor failure: Due to the quality or improper installation of the motor of some impact crusher equipment, there may be problems such as accidental stopping, out of stock of the pulley, broken pin, bearing damage, slipping of the transmission belt, and even burning, which may cause the impact crusher to jam.

Impact crusher is a commonly used crushing equipment, and different problems may also occur during use. In order to ensure that the impact crusher can resume operation as soon as possible, we need users to master the solutions to some common problems. When the impact crusher is blocked, it can be solved according to the above reasons.