Hello! Welcome to Zhejiang Lizhi Machinery Co., LTD. Website!
hot key words:
Location:Home > News > Industry News
The small door on the back wall of the jaw crusher is used to remove non-breakable materials
view:539   source:   Time:2020-5-28

In the past, it was very difficult to deal with hard metal scraps such as scrap iron and scrap steel. With the advancement of technology, the emergence of jaw crushers can easily solve this problem and is easy to implement. The decomposition of scrap metal greatly improves economic efficiency. The jaw crusher's discharge size is more refined, which greatly meets the customer's high standards for scrap discharge. It is an ideal product in the current scrap shredding market, and is deeply trusted and supported by customers.


The structure of the jaw crusher has been developed and practiced by technicians for many years, and the production efficiency of waste crushing has been greatly improved. Jaw crusher is mainly composed of frame, rotor and hammer. The motor directly drives the rotor through a flexible coupling. As the hammer hits the broken plate produced when the rotor rotates, the material is broken. The frame is divided into upper and lower seat parts, and the inner wall is provided with a protective lining to prevent internal damage to the frame. There are four small doors on the frame. The small door on the front wall of the upper frame is convenient for adjusting the crushing plate.


A small door on the back wall is used to remove non-breakable materials. Before the lower seat, two small doors on the rear wall are used to inspect and clean the screen. The rotor consists of a rotor shaft, V belt, disc, hammer shaft, hammer and so on. The rotor shaft is provided with a triangular disc and a disc, and the disc is separated from the disc by a sleeve. The disc is equipped with a hammer shaft, and the hammer is suspended on the hammer shaft. When the rotor shaft rotates, the hammer rotates with the initial rotation. The sieve bar device is arranged in the groove of the sieve base and located on both sides of the inner wall of the lower base. An eccentric wheel is arranged under the sieve frame to adjust the gap between the sieve rod and the hammer rod.


The jaw crusher has low requirements for raw materials. In the process of using the jaw crusher, only the size of the model should pay attention to the area of the crushed material block to complete the daily crushing work. Jaw crusher is a long-term used equipment. For those who are interested in buying a jaw crusher, the price does not have to be too strong, but the product quality requirements should be paid attention to. High-quality equipment can not only ensure production efficiency, but also ensure low maintenance costs.

Products
Solution
Service Accessories
News
About Us
Sweep, pay attention to Lizhi Machinery
Mobile website
 
WeChat public account

Tel:0570-8366662  E-mail:13017742123@163.com

Address: 13 Liushan No1 Road, Hangbu Industrial Zone, Kecheng District,Quzhou,Zhejiang,China



在线咨询一
点击这里给我发消息
在线咨询二
点击这里给我发消息