Voltage in the working area: No matter which type of impact crusher will be selected, during operation, if the working warning voltage is not reached, the indirect interruption will affect the output of the impact crusher, and also damage the parts in the equipment, causing Equipment failure. Therefore, it is strongly recommended that when the impact crusher is crushing limestone materials, sufficient power must be maintained. If the voltage is too low, the impact crusher will not have sufficient crushing force, which will also affect the output.

Impact crusher

The size of the discharge port of the impact crusher gives the output level: some users deliberately adjust the discharge port of the impact crusher to be too small in order to make the discharged limestone more fine-grained, which will make the crushed limestone not smooth Discharge and accumulate at the discharge port, which reduces the output of the impact crusher. Therefore, the user should adjust the discharge port of the impact crusher according to the instructions.

According to the nature of limestone material. The impact crusher crushes limestone, and the high output is also related to the nature of the material. Such as material hardness, humidity, viscosity, etc., this has a great influence on the output of impact crusher. When the viscosity of limestone is large, some limestone materials will stick to the wall of the crushing cavity or stick to the row. At the material port, the discharge port will be blocked in severe cases, which will affect the normal production of the impact crusher.

According to the feeding method, the output is high and low: the correct feeding method can increase the output of the impact crusher, which requires the operator to undergo strict training to achieve uniform feeding, and the limestone cannot be added too fast or too slowly. If it is too large or too small, limestone cannot be added to the side of the distribution plate, otherwise the limestone entering the crushing cavity of the impact crusher will be uneven and affect production. The feeding method is correct and the output will not be hindered.

Make reasonable adjustments to the hammer crusher according to production needs. When scrap metal is required for fine crushing production, if the bottom aperture of the hammer crusher meets the requirements, but the gap between the blade and the bottom of the screen is large, it will also cause difficulty in feeding materials. Even burn the motor; when the screen bottom aperture is too large and the gap between the hammer head and the screen bottom is too small, the hammer crusher will not meet the production design requirements, and the particle size of the finished product will not meet the production needs, resulting in waste of equipment and materials. Therefore, in the actual operation and production, the internal structure of the hammer crusher should be reasonably adjusted according to the production needs to ensure that the equipment is in a good operating environment and maintain efficient production capacity.

For special materials, the hammer crusher will communicate with customers in advance by changing the size of the hammer crusher's feed inlet to achieve perfect crushing, such as car shells, refrigerators, waste home appliances, and waste children's toys. The crushing effect is very ideal. The rotor of the large-diameter hammer crusher rotates at a high speed under the driving of the motor.

When the material enters the hammer crushing area of the hammer crusher, it hits and crushes with the steel hammer on the rotor, and then is thrown to the squeezing device for crushing again. The second squeeze reduces the willfulness and returns to the hammer crusher cavity again. For smashing, such repeated work, we only need to set the control size of the output material, when the qualified material meets the specified particle size requirements, it will flow out along the complex screen, and the unqualified material will continue to work in the machine cavity Until qualified.